We were one of the first outlets to break the news back in June about the Dallas startup touting a sub-$25,000 pickup truck that was going to be built in America and not an EV. The automotive world was skeptical, but after speaking with the founder, Zach De Bernardi, it seemed like there might be something to it.
Today, the Dallas-based REO Trucks unveiled the new REO Runabout, a family of three compact utility vehicles developed in collaboration with Frank Stephenson and his design studio, Frank Stephenson Design. With estimated starting prices as low as $21,500, traditional body-on-frame construction, mechanical four-wheel drive, and a deliberate rejection of unnecessary complexity, the new lineup aims to revive something largely missing from the modern American automotive marketplace: the affordable, straightforward pickup.
The lineup consists of the two-seat T4X work truck, the five-seat T4C crew cab, and the six-seat S4C family SUV. Each shares the same basic architecture, but each has been developed around a specific purpose. The idea is refreshingly simple. Build trucks people actually need, make them affordable enough to purchase, and design them so that owners can keep them running for decades.

A Historic American Name Returns
For automotive history enthusiasts, the REO name carries considerable significance. The company traces its roots to Ransom Eli Olds, a pioneer of the American automobile industry and the man who established Oldsmobile. Following a disagreement with the management of Olds Motor Works, Olds established a new company in Lansing, Michigan, in 1904. Using his initials, REO began producing automobiles in 1905 and eventually became one of the country’s important early manufacturers.
While Oldsmobile would develop into one of General Motors’ most recognizable brands, REO established its own identity, particularly in commercial vehicles. The introduction of the REO Speed Wagon in 1915 helped establish the company as a builder of practical trucks. Considered an important predecessor to the modern pickup, the Speed Wagon became synonymous with the hardworking American commercial vehicle.
REO continued producing automobiles until 1936 before concentrating on trucks and other commercial vehicles. Its legacy eventually continued through the Diamond REO name, with truck manufacturing in Lansing ending in 1975. More than half a century later, REO is returning under the leadership of founder and CEO Zach De Bernardi, who believes the American truck market has abandoned a significant portion of its customers.
“Trucks have become too big, too complex, and too expensive, and a lot of other customers just like me want a genuine alternative,” said De Bernardi. The new company has acknowledged its historical roots while developing an entirely new vehicle platform intended to serve contemporary American drivers.

Frank Stephenson Brings Automotive Design Royalty to the Project
Frank Stephenson’s involvement adds an interesting dimension to the REO revival. Few contemporary automotive designers have a résumé quite like Stephenson’s. His career includes influential work on the modern MINI, the first-generation BMW X5, the Ferrari F430, the Maserati MC12, the revived Fiat 500, and McLaren supercars, including the P1. When we initially spoke to the founder, we guessed it would be Stephenson based on his description of the designer, and our hunch proved to be right.
These vehicles occupy dramatically different segments, yet many share an important quality: a recognizable visual identity that transcends passing design trends. For REO, Stephenson and his design team faced an unusual challenge. Rather than creating another high-performance exotic or expensive luxury vehicle, they were asked to design a practical, affordable truck that could remain relevant for decades.
“The design brief for the new REO truck range contains three words that, to any designer, are music to the ears: simple, honest and built to last,” said Stephenson.
Those principles are evident in the Runabout’s upright proportions, broad shoulders, flat body panels, and unmistakably traditional truck silhouette. The design incorporates elements inspired by the original REO Speed Wagon, particularly the prominent upright grille, while the American bison influenced the vehicle’s muscular front fenders and planted stance.
Four rectangular LED headlights, arranged vertically in pairs, establish a distinctive front-end appearance. Unlike elaborate proprietary lighting systems, the headlights use standardized dimensions that let owners buy replacements from standard automotive parts suppliers. Even the removable wheel arch extensions serve a practical purpose. Owners can replace damaged panels independently without complicated bodywork, and those who want larger off-road tires can modify the vehicle without extensive cutting. The result is a design rooted in American truck history without trying to recreate a century-old vehicle.

Three Versions of the REO Runabout
The Runabout family will initially include three models sharing a 119.6-inch wheelbase, a steel ladder-frame chassis, and common front bodywork. Each vehicle will have a different rear body configuration suited to its intended use.
REO T4X: The $21,500 Work Truck
The T4X is perhaps the most compelling vehicle in the lineup. With a two-seat cabin and a traditional steel flatbed, the T4X recalls a time when small pickups were designed primarily to accomplish work rather than serve as status symbols.
The flatbed measures 79.1 inches long and 70.6 inches wide between its side walls, with drop sides that allow loading from either side or the rear. Integrated steps make accessing the cargo area easier, while the tailgate incorporates practical details including a ruler, cup holders, phone storage recesses, and a bottle opener. A modular roof-mounted accessory panel allows owners to install auxiliary lighting and other equipment.
REO estimates that the T4X will start at $21,500, making it considerably less expensive than most new pickups currently available in America if the company can meet that price target. The T4X will also be the first Runabout model to reach production.
REO T4C: A Practical Five-Seat Crew Cab
For buyers who need more passenger space, the T4C combines a four-door cabin with a separate pickup bed. The truck accommodates five passengers and offers a 54.1-inch cargo bed, while maintaining the same basic wheelbase as the work-oriented T4X. The spare tire is positioned in a dedicated bed recess, and the longer roof accommodates two modular accessory mounting panels.
With an estimated starting price of $25,000, the T4C could appeal to buyers who remember the straightforward compact crew-cab pickups of the 1980s and 1990s. It also presents an interesting alternative to today’s increasingly expensive midsize trucks.
REO S4C: A Compact Six-Seat SUV
The S4C applies the same philosophy to a family-oriented utility vehicle. At 182.7 inches long, excluding the rear-mounted spare tire, the S4C is the shortest member of the Runabout family. Its reduced rear overhang also gives it the best departure angle in the lineup.
The S4C is designed to seat six passengers, with a side-facing jump seat contributing to that capacity. Final interior details and seating specifications remain subject to validation. Perhaps its most interesting feature is the rear cargo door. Rather than a conventional liftgate, the S4C uses a full-size side-hinged tailgate with a rear window that lowers completely into the door. A full-size spare tire is carried externally on a swing-out mount.
The estimated starting price is $28,500, positioning the S4C as an affordable alternative to more expensive traditional SUVs.

Old-School Engineering for Modern Drivers
Underneath the distinctive styling, the Runabout embraces mechanical simplicity. All three models are being developed around a traditional steel ladder-frame chassis, with stamped-steel body panels selected for durability, manufacturing efficiency, and ease of repair.
The planned powertrain is a longitudinally mounted, naturally aspirated four-cylinder gasoline engine. REO has specifically decided against turbocharging, direct injection, and automatic stop-start technology to reduce complexity. A six-speed manual transmission is planned as standard equipment, with an automatic available as an option. Perhaps most appealing to traditional truck enthusiasts, every Runabout is intended to feature part-time four-wheel drive with a mechanically operated transfer case and low-range gearing.
Drivers will select two-wheel drive, four-wheel drive high, or four-wheel drive low using a conventional floor-mounted lever. A locking rear differential will be available for additional traction. The suspension is equally conventional, with solid axles at both ends, coil springs in the front, and leaf springs in the rear. Ventilated front disc brakes, rear drum brakes, and hydraulic power steering round out the mechanical package. These decisions may seem unusual in an industry increasingly focused on sophisticated electronics and complex suspension systems, but they are consistent with REO’s stated priorities.
The company is targeting a 500,000-mile powertrain lifespan, although that remains an engineering objective rather than a demonstrated durability achievement. REO has also published preliminary targets of 5,000 pounds of towing capacity, 22 to 25 mpg combined fuel economy, and approximately 500 to 600 miles of driving range per tank. All remain subject to testing and validation. For enthusiasts, a new pickup with solid axles, a manual gearbox, mechanical low-range four-wheel drive, and a non-turbocharged engine may sound like something from a different era.

The Ransom Package Adds Off-Road Capability
Named in honor of company founder Ransom Eli Olds, the optional Ransom Package will be available across all three vehicles. The package adds 265/70R17 all-terrain tires, upgraded shock absorbers, and a 2.5-inch increase in ride height. According to REO’s preliminary specifications, the additional ground clearance raises the approach angle from 42.5 degrees to 48.3 degrees and the breakover angle from 16.3 degrees to 21.2 degrees.
Orange suspension accents help distinguish the Ransom models, along with upgraded front dampers and rear suspension components. Combined with the standard mechanical four-wheel-drive system, the package is intended to make the Runabout a capable off-road vehicle without relying on expensive electronically controlled systems.

Right to Repair Is More Than a Marketing Slogan
While affordability and styling are important parts of the Runabout’s appeal, REO’s most ambitious promise may concern what happens after the sale. Modern vehicles increasingly rely on proprietary software, electronically paired components, specialized diagnostic equipment, and complicated repair procedures.
REO intends to take a different approach. The company says its vehicles will not use software-based parts pairing, allowing replacement components to function without requiring proprietary electronic authorization. Diagnostic information is intended to be accessible using an inexpensive scanner, and the company plans to make its factory service manual freely available online.
The public parts catalog will include published prices, with REO promising 20 years of support. Other planned details include a quick-release oil filter, an access panel for the fuel pump, and a service diagram etched into the underside of the hood. Exterior bumpers, interior door panels, headliners, and trim pieces are being designed for removal in under five minutes using ordinary tools.
REO also plans an authorized maker program that will allow independent manufacturers to build compatible components and accessories using verified factory mounting information. This approach could encourage a substantial aftermarket industry, particularly if the Runabout develops a following among off-road enthusiasts and owners who prefer repairing or modifying their own vehicles.
Inside, the same philosophy continues. Although REO won’t reveal the full interior design until 2027, it says the cabin will feature physical switches and controls large enough to operate while wearing work gloves. Digital instrumentation and navigation will still be included, but critical driving functions will remain independent of over-the-air software updates. Planned features include manually adjustable bucket seats, power windows, 120-volt outlets, accessory switches with pre-installed wiring, and a tool-bit set designed to fit every fastener on the vehicle. REO also intends to accommodate drivers up to 6 feet 5 inches tall, an important consideration for a compact utility vehicle.

How Does the REO Runabout Compare With Today’s Pickup Trucks?
The challenge REO is trying to address becomes clear when you look at current pickup truck prices. For the 2026 model year, the Ford Maverick XL starts at about $27,145 through Ford’s online configurator, while the Toyota Tacoma begins at $32,545 and the Ford Ranger XL starts at $33,550. By comparison, the proposed $21,500 REO T4X would undercut all three by thousands of dollars.
The differences extend beyond price. The Ford Maverick uses a unibody platform, while the Tacoma and Ranger offer traditional truck construction but occupy larger, more expensive segments. The Runabout aims to combine a relatively compact footprint with the body-on-frame architecture, mechanical four-wheel drive, and repairability more commonly associated with older utility vehicles.
Naturally, these comparisons require some perspective. Ford and Toyota currently sell fully developed, federally certified vehicles supported by established manufacturing operations, service networks, warranties, and extensive testing. REO must still deliver those fundamentals.
And while a $21,500 pickup sounds attractive today, the earliest customer deliveries are still roughly two years away. Costs, regulations, supplier pricing, and market conditions could change considerably before production begins.
Nevertheless, the Runabout represents an intriguing alternative to a market that has spent much of the past two decades making pickup trucks bigger, more powerful, and more expensive.
Built in Texas, With Production Planned for 2028
REO plans to manufacture the Runabout family in Texas, using an existing industrial facility that can be adapted for vehicle assembly. The company cites Texas’ automotive supplier infrastructure and proximity to manufacturing operations in Mexico as important advantages.
The T4X will lead the introduction, with pilot builds scheduled for 2027 and the order book expected to open in 2028. Initial customer deliveries are targeted for late 2028 through early 2029, followed by the T4C and S4C. REO is adopting a direct-to-consumer business model rather than establishing a traditional dealership network. Estimated starting prices are $21,500 for the T4X, $25,000 for the T4C, and $28,500 for the S4C.
Those figures remain preliminary. REO’s reservation documentation states that final purchase agreements may include taxes, delivery charges, and other applicable fees. Despite the early development stage, REO reports receiving more than 40,000 paid reservations for the Runabout family.
Customers can reserve a position in line for $25, with deposits refundable until a purchase agreement is signed. These reservations demonstrate interest in the concept, although they are not binding vehicle orders.

Could REO Bring Back the Affordable American Truck?
There is something appealing about the entire REO proposition. The American automotive industry has spent decades developing vehicles capable of extraordinary performance, comfort, and technological sophistication. Today’s trucks can tow enormous trailers, accelerate like sports cars, and offer interiors rivaling luxury sedans.
Yet in pursuing those capabilities, manufacturers have also left behind buyers who simply want an inexpensive, durable truck. A compact, body-on-frame pickup with a manual transmission, a reliable four-cylinder engine, and readily available replacement parts should not be unusual. For much of American automotive history, it was an ordinary one.
REO’s challenge is turning that philosophy into a vehicle that meets modern safety and emissions standards while remaining commercially viable at the proposed price. The company still needs to demonstrate its powertrain, validate its durability targets, complete vehicle certification, establish production operations, and build a sustainable support system for owners.
Those are substantial hurdles, particularly for a startup entering one of the world’s most competitive automotive markets. But the combination of REO’s history, Frank Stephenson’s design expertise, and a clear understanding of what many truck buyers feel is missing makes the Runabout worth watching.
If the company delivers even most of what it promises, the result could be one of the decade’s more interesting new automotive entries. Sometimes innovation does not mean adding another touchscreen, another software subscription, or another complicated feature. Sometimes it means remembering why people fell in love with pickup trucks in the first place.
And perhaps the most remarkable thing about the new REO Runabout is that its biggest selling point is not what it adds to the modern truck.

REO Runabout Quick Facts
| Specification | Details |
|---|---|
| Manufacturer | REO Trucks |
| Headquarters | Dallas, Texas |
| Design | frankstephenson design |
| Models | T4X, T4C, S4C |
| T4X starting price | $21,500 estimated |
| T4C starting price | $25,000 estimated |
| S4C starting price | $28,500 estimated |
| Engine | Naturally aspirated gasoline four-cylinder |
| Transmission | Six-speed manual or optional automatic |
| Drivetrain | Part-time mechanical four-wheel drive |
| Transfer case | Mechanical with low-range gearing |
| Chassis | Steel ladder-frame |
| Suspension | Solid axles, front coil springs, rear leaf springs |
| Wheelbase | 119.6 inches |
| Target towing capacity | 5,000 pounds |
| Target fuel economy | 22 to 25 mpg combined |
| Target driving range | 500 to 600 miles per tank |
| Powertrain durability target | 500,000 miles |
| Off-road option | Ransom Package |
| Manufacturing location | Planned for Texas |
| Pilot builds | 2027 |
| First customer deliveries | Targeted late 2028 to early 2029 |
| Reservation deposit | $25, refundable |
Pricing, specifications, range, towing capacity, durability and production dates are preliminary manufacturer targets.
Frequently Asked Questions About the REO Runabout
What is the REO Runabout?
The REO Runabout is a new family of compact American trucks and SUVs being developed by Dallas-based REO Trucks. The lineup includes the T4X work truck, T4C crew cab, and S4C family SUV, all sharing a traditional body-on-frame platform.
How much will the REO Runabout cost?
REO estimates that the T4X will start at $21,500, the T4C at $25,000, and the S4C at $28,500. These are preliminary prices, not final customer purchase prices.
Who designed the new REO trucks?
The Runabout family was designed in collaboration with frankstephenson design, the studio founded by automotive designer Frank Stephenson. His previous work includes the modern MINI, Ferrari F430, Maserati MC12, Fiat 500, and McLaren P1.
Will the REO Runabout have a manual transmission?
Yes. REO plans to offer a six-speed manual transmission as standard equipment, with an automatic transmission available as an option.
Will the REO Runabout have four-wheel drive?
Yes. All three models are planned with standard part-time four-wheel drive, a mechanical transfer case, and low-range gearing. A locking rear differential will also be available.
Where will the REO Runabout be built?
REO plans to manufacture the Runabout in Texas at an existing industrial facility adapted for vehicle assembly. The final assembly location has not yet been announced.
When will the REO Runabout be available?
REO plans to build pilot vehicles in 2027 and begin customer deliveries in late 2028 or early 2029. The T4X work truck is scheduled to arrive first.
How reliable will the REO Runabout be?
REO is targeting a 500,000-mile powertrain life through a simple engine design and conventional mechanical systems. This is an engineering goal and has not yet been independently demonstrated.
Can you repair a REO Runabout yourself?
REO intends to make its vehicles easy for owners and independent mechanics to service. Planned features include a publicly available service manual, open parts information, no software-based parts pairing, and inexpensive diagnostic access.
Can you reserve a REO Runabout?
Yes. Reservations are available through REO Trucks with a refundable $25 deposit. A reservation secures a place in line but does not constitute a binding vehicle purchase.
Is REO the same company that built the original Speed Wagon?
The new REO Trucks is a modern company reviving the historic marque associated with Ransom Eli Olds. The original REO manufacturer began producing automobiles in 1905 and later became well known for commercial trucks, particularly the REO Speed Wagon.
Learn more: REO Trucks Official Website



